TrueZIP provides CRUD (Create, Read, Update, Delete) operations for archive files while maintaining an easy-to-use file system API. This enables you to treat archive files as if they were virtual directories and archive entries as if they were virtual files within these virtual directories.

The following tutorial assumes some preconditions:

  • You need to have a basic knowledge of the java.io API. If not, please refer to The Java Tutorials Lesson: Basic I/O first.
  • You need to have a working application skeleton with the required TrueZIP JARs on the class path. If not present, please refer to the section Kick-Starting on the Getting Started page first.

The package de.schlichtherle.truezip.file

The entry point to the TrueZIP File* API is the package de.schlichtherle.truezip.file. It contains the classes TFile, TFileInputStream, TFileOutputStream, TFileReader, TFileWriter etc, or just TFile* for short.

Your starting point for almost all file system operations is an object of the class TFile. This class inherits from java.io.File, so you can use it with other APIs for its super class. The class TFileChooser uses this feature by subclassing javax.swing.JFileChooser so that you can browse archive files with it, too. Note however that you can't use a plain old java.io.FileInputStream, java.io.FileOutputStream etc with a TFile object.

While TFile supports the traditional File API, it also provides many additional methods to overcome the known limitations of its super class, e.g. the additional methods throw an java.io.IOException on failure instead of simply returning a boolean value - see below.


Creating an archive file works exactly like creating any other directory, so you could simply call TFile.mkdir() or TFile.mkdirs() in order to create an archive file or a member directory.

File dir = new TFile("archive.zip/dir");
dir.mkdirs(); // don't do this!

However, while this works as expected, it's actually sub-optimal: Explicitly creating a directory within an archive file may create an otherwise empty archive entry for the directory in the target archive file. This wastes space in the resulting archive file and therefore is not recommended. Instead, you should simply directly create the file entries within an archive file.

The following example shows how to create an archive entry with the class TFileWriter without the need to create its containing archive file or the directory within this archive file first:

File entry = new TFile("archive.zip/dir/HälloWörld.txt");
Writer writer = new TFileWriter(entry);
try {
    writer.write("Hello world!\n");
} finally {

Note the use of a finally-block to ensure that the writer gets always close()d. This is vital for any I/O resource (not just within TrueZIP) in order to ensure that any operating system resources get released as soon as possible, even in the event of an IOException or any other Throwable, e.g. an OutOfMemoryError. Please also consider that the close() method may throw an IOException, too. It is an error to ignore this! So please wrap the entire block in another try-catch block or else declare the enclosing method to potentially throw an IOException.

Actually, it's a typical issue for long running Java applications to run out of file descriptors because the programmers haven't ensured to properly close their I/O resources. So please make sure you always close your I/O resources in a finally-block. In case you need some aid to check your code for this issue, I recommend to use FindBugs.


Reading an archive entry is as easy as writing it - just use a class like TFileReader and point it to the archive entry:

File entry = new TFile("archive.zip/dir/HälloWörld.txt");
Reader reader = new TFileReader(entry);
try {
    // Do the processing here
} finally {

Note again the use of a finally-block to ensure that the reader gets always close()d.

OK, this is trivial, but how do you find the archive entry to read in the first place? Remember that the TFile class extends File, so you can simply use TFile.list(), TFile.listFiles() etc.

The following example prints the members of the previously created archive file to the standard output:

TFile archive = new TFile("archive.zip");
for (String member : archive.list())

Following the previous example, this would just print the string dir to the standard output. This is because File.list(), and hence TFile.list(), just list the immediate members of a (virtual) directory. You need to apply this method recursively to print an entire directory tree.


Overwriting the contents of an archive entry works in exactly the same way like creating it - just use a TFileOutputStream or a TFileWriter and point it to the respective archive entry with the help of a TFile.

Of course a file system does not only store entry contents, but also some meta data, e.g. the last modification time. Just like with a real file system, you can easily update the last modification time of an archive entry by calling TFile.setLastModified(long).

File entry = new TFile("archive.zip/dir/HälloWörld.txt");
entry.setLastModified(System.currentTimeMillis()); // sub-optimal!

However, there may be smarter ways to do this: Most times you want to set the last modification of a file system entry its because you are copying one file system entry to another and you want to preserve some meta data, too. In this case you should use the Bulk I/O Methods instead in order to benefit from their superior performance.


You may be guessing it already, so let it suffice to say that deleting an archive entry works in exactly the same way as with a regular file system entry - just call TFile.delete().

File entry = new TFile("archive.zip/dir/HälloWörld.txt");
boolean ok = entry.delete(); // sub-optimal!

One shortcoming of this method is that it just returns a boolean value to indicate success or failure. To overcome this, another method has been added which is aptly named TFile.rm().

new TFile("archive.zip/dir/HälloWörld.txt").rm();

This method returns this for fluent programming and throws an IOException with the path name and a short description of what went wrong as its message.

Bulk I/O Methods

TrueZIP is not just about accessing archive files: The TFile class provides some very useful methods for standard tasks like copying, moving or removing entire directory trees. Here's how to create a TAR.GZ file from a ZIP file:

new TFile("archive.zip").cp_rp(new TFile("archive.tar.gz"));

These methods are not only very convenient to use, they also provide superior performance because they apply multithreading and in the case of archive entries, use a feature called Raw Data Copying (RDC). For example when copying arbitrary file system entries, one thread reads the input entry while another thread writes the output entry. When copying ZIP entries from one ZIP file to another, then thanks to RDC the input entry does not get decompressed just in order to compress it again to the output entry; instead, the raw entry data gets copied from the input entry to the output entry directly.

For more information about the available bulk I/O methods, please refer to the section Bulk I/O methods of the TFile class Javadoc. For now, let's just clean up behind us:

new TFile("archive.zip").rm_r();    // remove recursively
new TFile("archive.tar.gz").rm_r(); // dito

Configuring Archive Detection

You may be wondering how TrueZIP gets configured to treat a file name with a tar.gz or zip suffix as a TAR.GZ or ZIP file instead of a plain old file. For now, let it suffice to say that TrueZIP follows the convention-over-configuration principle as much as possible, so there are reasonable defaults for everything in order to relieve you from typical configuration tasks.

For the previous examples to work, the JARs of the driver modules TrueZIP Driver TAR and TrueZIP Driver ZIP need to be present on the run time class path. You can do this by adding the Maven artifactId truezip-driver-tar and truezip-driver-zip as a dependency to the POM of your Maven build.

For more information about configuring the client APIs, please refer to the article Configuring TrueZIP File*.

False Positive Archive Files

Sometimes a file system entry may have a suffix which is configured to get recognized as an archive file, however the file is not an archive file or not even a file, e.g. a directory. This is called a false positive archive file or false positive for short.

TrueZIP safely detects any false positives and treats them according to their true state, that is, like a plain file or directory. This finding will be remembered until the next call to TVFS.umount(), so the performance impact is minimal.

Committing Changes / Cleaning Up

If your application has created or changed one or more archive files, then these changes need to get committed sometime. Even if your application has done read-only acess to the virtual file system, some temporary files may have been created to speed up random access - this dependends on the driver implementation.

If your application is only short-running, then there is actually nothing to do because the TrueZIP Kernel automatically registers and de-registers a JVM shutdown hook which will commit all changes when its run. Note that shutdown hooks are run even if the application terminates due to a Throwable.

However, if your application is long running or wants to handle any exceptions, then you may want to manually call this operation - here's how to do this:


As a side effect, once this operation succeeded, third parties (e.g. other processes) can safely access the processed archive files until the next time your application starts to operate on them again.

Performance Considerations

Take care not to call TVFS.umount() in a loop which updates the same set of archive files because this would result in poor performance in the order of O(n*n) instead of just O(n), where n is the total number of archive entries.

For more information, please refer to the Javadoc for TVFS.umount().